************ 1962 Cyprus Scenery  **************

by Mike Stevens - RangerXLT1972@aol.com 

Version 1, April 2018, for FS2004 only.

NOTE: This file, AI traffic, and lots of classic airliners can be downloaded free from Tom Gibson's California Classics at - http://www.calclassic.com/ 

************************

Airports included in this scenery:

1. LCNC Nicosia. Custom detailed airport.  A joint RAF/civillian airport until 1966.  A new terminal was built in 1968.  Airport was abandoned in 1974 due to the Turkish invasion of Cyprus.  Today it remains in a "no man's land" and is used by UN peacekeeping forces.

2. LCRA RAF Akrotiri.  An RAF air base opened in 1955.  The main RAF base on Cyprus.

3. CX00 RAF Kingsfield.  A minor RAF air base in East Cyprus opened in the late 1950s.

4. LC0A RAF Lakatamia.  A world war 2 RAF base closed in the late 1940s.

5. LCLK RAF Larnaca.  A world war 2 RAF base closed in the late 1940s and during the 1950s and 1960s used a gunnery range.  After the Turkish invasion of Cyprus, Larnaca became the main airport in the Republic of Cyprus.

6. LCPH RAF Pafos.  A world war 2 RAF base closed in the late 1940s. A new civillian airport was built in 2008 and is now the second most important airport in the Republic of Cyprus.

7. LCEN RAF Tymbou.  A world war 2 RAF base closed in the late 1940s.

8. LCGK Gecitkale.  A Turkish airbase in Northern Cyprus constructed in 1990 (removed in this scenery).



Installation instructions:


1. You must download and install rafsupportverhicles.zip by Ian Elliot and install them into your addon scenery library.  This file is available at Flightsim.com - otherwise you won't see any RAF vehicles in this scenery.

2. Optional - Ian Elliot has created a late 1950s - early 1960s version of Malta's airport RAF Luqa.  This file is also available at www.flightsim.com as rafluqa.zip.  I have included an optional folder named "rafluqa optional" which modifies the Luqa AFCAD to better accomodate the CalClassic AI traffic, and includes ez scenery bgl files which place oil spots, ground equipment, people, ramplights and other details etc. These files are optional for those who use Ian Elliot's RAF Luqa scenery. Be sure to back up his orginal files first in case you want to go back.  

PLEASE NOTE - If you have a file in your Landclass/scenery folder called "LCNC_landclass.bgl", you should remove or delete that file when installing my two landclass files.



**** IMPORTANT NOTICE FOR THE USER PLEASE READ  ****

YOU WILL NEED TO DOWNLOAD the MEGA download for the Static Objects library from WWW.CalClassic.com, along with the AI downloads if you wish to see traffic.  If you already use the classic AI traffic, make sure you have the latest update as there are some airport changes in this scenery.


Mike Stevens,
RangerXLT1972@aol.com
Questions or comments can also be directed to me or about this scenery in the forum at www.calclassic.com.


Suggested Additions:

If you do not have another airport texture addon, I suggest that you download and install airland1.zip from AVSIM or elsewhere.  It increases frame rates while adding detail to the concrete and asphalt aprons, taxiways, and runways.

AI propliner and GA traffic matching this scenery is available separately from www.calclassic.com (AI Aircraft page).  

Credits:

Airstairs object originally by Jaap de Baare. Thanks again!

Airport surfaces created with AFCAD2 and ADE, by Lee Swordy and Jon Masterson.

This scenery uses Rwy12 and EZ-Scenery Object Libraries.  Wonderful job, guys!

Produced using SceneGenX by Tom Hiscox, GMAX by Discreet, ExcBuilder by Paavo Pihelgas, Ground2K4 by Christian Fumey, AND Instant Scenery by Konstantin Kukushkin (Abacus).  Thanks to all!


INSTALLATION

1.  Quit FS2004 if running.

2.  Unzip this zip file to a temporary folder.  Then move the Cyprus 1962 folder into your FS2004 addon scenery folder.

3.  Move the two landclass files from the "landclass" folder located inside the Cyprus 1962 zip file into your CalClassic LandClass/scenery folder.  If you do not have such a folder, create a folder entited "CalClassic LandClass" in your addon scenery folder and within that folder create another folder called "scenery" and place the two landclass files into that scenery folder, then activate that folder in your Scenery Library.

PLEASE NOTE - If you have a file in your Landclass/scenery folder called "LCNC_landclass.bgl", you should remove or delete that file when installing my two landclass files.


4.  OPTIONAL - Install all of the AFCAD files in the Cyprus 1962 "world scenery" folder into your FS2004\Scenery\World\scenery folder.  This will change the names of these airports back to their 1962 names in your main menu when you select an airport or country.


NOTE FOR NEXT STEPS:  If you have already installed some of the CalClassic scenery packages, 
you may have at least some of the required scenery layers installed.  If so, skip that 
step below.

5. Start FS2004, and go to the Settings/Scenery Library choice on the opening screen.  If you are currently flying, press Escape (Esc) and then End Flight to get to this screen. Look at the top portion of the list.  If there is no 
CalClassic Landclass area listed there, click on the Add Area button.  Double click the ADDON SCENERY folder.  Click the CalClassic Landclass folder once.  Click OK. If you are using system 7 or later you must click the white area on the screen to make it disappear.

6. Click on the Add Area button. Double click the ADDON SCENERY folder.  Click the Cyprus 1962 folder once.  Click OK. If you are using system 7 or later you must click the white area on the screen to make it disappear.

7. If you have Ian Elliot's "RAF Luqa" (LMML Malta) installed or are planning on installing it in your FS addon scenery library and wish to add ground equipment, oil spots, etc to the passenger terminal area, then install the files from the folder called "rafluqa optional" into the RAF Luqa scenery folder.


8. Click OK. Quit and restart FS.


9. If you later want to fly in the modern era, just go into the Scenery Library 
(Settings/Scenery Library) and click on the Enabled box next to the Cyprus 1962 and CalClassic Landclass entries until the red check marks are removed to deactivate the 1962 scenery (do not deactivate the Static
Objects Library layer).  Reverse this process again to go back to 1962.

NOTE: This file, AI Traffic for this scenery (and the world), and lots of classic 
airliners can be downloaded free from Tom Gibson's Classic Airliner web site at - 
http://www.calclassic.com
**************************************************************************
Now the legal stuff:

COPYRIGHT 2018 BY MIKE STEVENS, ALL RIGHTS RESERVED

THIS SCENERY IS THE PROPERTY OF THE AUTHORS, AND CANNOT BE 
RE-SOLD OR PACKAGED WITH ANY PRODUCT FOR SALE, WITHOUT THE 
EXPRESS WRITTEN PERMISSION OF THE AUTHORS.  THIS IS FREEWARE!!

THIS FILE MAY NOT BE UPLOADED TO ANY OTHER SERVERS.  THIS FILE ARCHIVE 
MAY NOT BE UPLOADED TO SERVERS THAT CLAIM ANY COPYRIGHT ON THESE FILES 
STORED ON THAT SERVER.

THIS FILE ARCHIVE MAY NOT BE UPLOADED TO SERVERS THAT HAVE A CHARGE
FOR THEIR USE; IF A VIABLE FREE OPTION IS PROVIDED THIS FILE MAY BE
UPLOADED THERE.  THIS FILE ARCHIVE MUST NOT BE PLACED ON CD FOR SALE
OR ANY OTHER PUBLIC DISTRIBUTION WITHOUT OUR PERMISSION.

THIS FILE ARCHIVE MUST REMAIN INTACT; YOU MAY NOT REMOVE AND UPLOAD
PARTS OF THIS ARCHIVE.

THE AUTHORS ARE NOT LIABLE FOR ANY DAMAGE THAT YOU MIGHT 
INCUR AS A RESULT OF USING THESE PRODUCTS.  YOU ASSUME THE RISK 
OF USE.
